{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Inserto per fresatura PNEG 1106XNEN-GL, per frese a spianare, CA420M
Codice art.: 599314
N. del catalogo: 223318
Codice materiale:
Dettagli prodotto
Dati tecnici
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | PNEG 1106XNEN-GL | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | pentagonal | |
| Wide insert B | 11 mm | |
| Thickness of the insert S | 6.35 mm | |
| Length of cutting insert L | 11.54 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 11 mm | |
| Height of cutting edge | 6.35 mm | |
| Diameter of the cutting insert d | 15.875 mm | |
| Corner radius R | 1.4 mm | |
| Corner chamfer length C | 2.6 mm | |
| Corner chamfer angle | 4 degrees | |
| Corner angle | 108 degrees | |
| Rake face chamfer width C | 0.7 mm | |
| Rake face chamfer angle | 35 degrees | |
| Rake angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 11 mm | |
| ISO-Code | PNEG 1106XNEN-GL | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | CA420M | |
| Coating | TiCn-Al2O3 | |
| Grade | CA420M | |
| Insert thickness T | 6.35 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | PN1106XN2N | |
| Interface coding for insert according to ISO TS 13399-60 | PN1106XN2N | |
| Insert designation | PNEG 1106XNEN-GL | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 10 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Tolerance Class | E | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered and rounded (S) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 10 pcs. | |
| Weight | 20 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identificazione e classificazione
| Codice articolo | 599314 | |
| Numero del catalogo | 223318 | |
| EAN / GTIN | 4960664732968 | |
| Codice del produttore | TMB05300 | |
| Produttore/persona responsabile | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Deutschland, www.kyocera-unimerco.de |
Tabella dati
K
230
Descrizione
Esecuzione:
Inserto pentagonale a 10 taglienti per lavorazione stabile ed economica.
GL - Geometria orientata alla superficie.
GL - Geometria orientata alla superficie.
Nota:
Valori indicativi per ae = 0,3×D.