{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Tassello per gesso FIF-CN II 8/60
Codice art.: 683063
N. del catalogo: 4655
Codice materiale:
Dettagli prodotto
Dati tecnici
| Professionale / Fai da te | Profi | |
| Lunghezza del tassello | 108 mm | |
| Profondità minima del foro | 65 mm |
Identificazione e classificazione
| Codice articolo | 683063 | |
| Numero del catalogo | 4655 | |
| EAN / GTIN | 4048962329919 | |
| Codice del produttore | 546443 | |
| Classe dell`articolo | RMH |
Descrizione
Vantaggi:
- To set with few hammer blows.
- The plate fits tight into the insulation thanks to its thickness of only 2.7 mm. Thus allows the application of low-cost, thin reinforcement layers.
- High retention forces thanks to the steel tip of the compound nail.
- Small anchoring depth of 35 mm saves on drilling times.
- The compression zone in the shank allows the plate to be drawn in precisely.
- For insulating material thicknesses up to 340 mm.
Area di applicazione:
- Building material classes A, B, C, D, E
- Concrete
- Full blocks made from concrete
- Building brick
- Solid sand-lime brick
- Hollow blocks made from lightweight concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Lightweight aggregate concrete
- Aerated concrete
- Fixing of ETICS insulation boards on concrete and masonry
- Flush-to-surface installation in ETICS insulating materials like mineral wool or polystyrene
Note applicative:
- The fixing is set in push- through installation.
- Simple, fast setting by driving the compound nail in using a standard hammer.
- Non load bearing layers such as adhesive and old plaster are included in the maximum useful length.