{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
GARANT Master Alu solid carbide torus cutter HPC, DLC, ⌀ DC / R1: 8/0,5mm
Article no.: 180287
Catalog no.: 206264
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 4
Product details
Technical Data
| Series | Master Alu | |
| Cutting edge ⌀ DC | 8 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 4 | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 33 mm | |
| Corner radius R1 | 0.5 mm | |
| Overhang length L1 incl. recess | 40 mm | |
| Recess ⌀ D1 | 7.4 mm | |
| Overall length L | 75 mm | |
| Shank ⌀ Ds | 8 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.05 mm | |
| Colour ring | yellow | |
| Type of product | Torus cutter |
Identification & Classification
| Article number | 180287 | |
| Catalog number | 206264 | |
| EAN / GTIN | 4062406398606 | |
| Manufacturer number | 206264 8/0,5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
500
N
450
N
400
N
180
N
140
N
180
N
130
N
110
N
160
N
140
N
120
N
140
N
260
N
260
N
140
N
120
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping non-ferrous materials.
Tolerances:
RS1 > 0.5 − 1.5 tolerance ±0.03.
RS1 > 1.5 tolerance ±0.05.
Very high feed rates when plunging vertically. Ramping capability up to 45°.
Tolerances:
- Corner radius
RS1 > 0.5 − 1.5 tolerance ±0.03.
RS1 > 1.5 tolerance ±0.05.
Very high feed rates when plunging vertically. Ramping capability up to 45°.
Application:
Particularly suitable for finishing work.