{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
SZMU 080412PNRMM, IC5400, Type: ST900
Article no.: 2026945
Catalog no.: 225803
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | NEODO | |
| Wet maximum | suitable | |
| Manufacturer’s designation | S890 SZMU 080412PNRMM IC5400 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Wide insert B | 8.2 mm | |
| Thickness of the insert S | 4.76 mm | |
| Length of cutting insert L | 8.2 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 5.2 mm | |
| Diameter of the cutting insert d | 8.2 mm | |
| Corner radius R | 1.2 mm | |
| Rake angle | 88.4 degrees | |
| ISO-Code | SZMU 080412PNRMM | |
| Type of chip breaker | MM | |
| Wiper length axial Lwa | 1.2 mm | |
| Tool material | Carbide | |
| Machining group | M (stainless steel); N (non-ferrous metals); P (steel) | |
| Tool application group | P10-P40; M10-M30; N10-N20 | |
| Cutting media, manufacturer’s designation | IC5400 | |
| Coating | PVD | |
| Grade | IC908 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SZMU 080412PNRMM | |
| Interface coding for insert according to ISO TS 13399-60 | SZMU 080412PNRMM | |
| Insert designation | SZMU 080412PNRMM | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 8 pcs. | |
| Direction of action | neutral | |
| Suitable for material | non-ferrous materials (N); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Cutting conditions | continuous | |
| Number of potential uses | 8 pcs. | |
| Content | 1 pcs. | |
| Correction factor fz | 1.5 |
Identification & Classification
| Article number | 2026945 | |
| Catalog number | 225803 | |
| EAN / GTIN | 2000001104729 | |
| Manufacturer number | 3388900 |
Application Table
P
190
P
180
P
170
P
150
P
140
Description
Version:
Double-sided indexable insert with 8 helical cutting edges. Special cutting edge geometry for smooth cutting to reduce power consumption during machining.
Note:
Standard application values for ae = 0.3 to 1 × D / ap max = 5.0 mm.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.