{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Burr GARANT Master Alu − very rough (non-ferrous / aluminium), Carbide DLC, Type: C1225
Article no.: 2106514
Catalog no.: 543710
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | GARANT Master Alu | |
| Wet maximum | suitable | |
| Manufacturer’s designation | Frässtift GARANT Master Alu − sehr grob (NE / Alu), HM DLC, Typ: C1225 | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 0080 mm | |
| Dry machining | suitable | |
| Shank diameter | 8 mm | |
| Shank length | 40 mm | |
| Oil | suitable | |
| Air | suitable | |
| Tool material | solid carbide | |
| Machining group | N (non-ferrous metals) | |
| Coating | DLC | |
| Cutter diameter | 12 mm | |
| Body diameter | 12 mm | |
| Cutting edge length | 25 mm | |
| Head length | 25 mm | |
| Burr shape | cylindrical burr with radius end | |
| Type of cut | single toothing | |
| Toothing grit designation | very coarse | |
| Interface | joint 1 | |
| Usable length | 40 mm | |
| Overall length | 65 mm | |
| Functional length | 25 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 8033 | |
| Machining method | form milling (die milling) | |
| Type of product | burr |
Identification & Classification
| Article number | 2106514 | |
| Catalog number | 543710 | |
| EAN / GTIN | 4067263117933 | |
| Manufacturer number | 543710 C1225 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
No chip adhesion and outstanding surface results. Shank ⌀ 6mm. Suitable for use in roughing and finishing applications. With high-performance coating for longer tool life, less heat input and reduced chip adhesion.
GARANT burrs are manufactured from the highest quality carbide with high wear resistance and maximum cutting edge strength, using only the latest CNC machines. Steel shanks are used when the head diameter is larger than the shank diameter, otherwise they are made from solid carbide.
The innovative tooth geometry permits a high metal removal rate and at the same time extremely smooth running and very good guidance. Extra-sturdy shank with 8 mm.
- High rate of material removal.
- Smooth running.
- High-performance coating for low thermal stress, longer tool life, and improved chip evacuation.
- State-of-the-art substrate optimised for aluminium materials.
- Maximum tool life.
GARANT burrs are manufactured from the highest quality carbide with high wear resistance and maximum cutting edge strength, using only the latest CNC machines. Steel shanks are used when the head diameter is larger than the shank diameter, otherwise they are made from solid carbide.
The innovative tooth geometry permits a high metal removal rate and at the same time extremely smooth running and very good guidance. Extra-sturdy shank with 8 mm.
Application:
Optimised for machining hard and soft aluminium alloys, plastics, bronze and non-ferrous metals.
Suitable for both manual use and industrial robots. For deburring, edge breaking, cleaning, weld and surface preparation.
For the most demanding burring operations.
Suitable for both manual use and industrial robots. For deburring, edge breaking, cleaning, weld and surface preparation.
For the most demanding burring operations.
Note:
Materials with poor thermal conductivity: Reduce speed in order to avoid overheating the burr and smearing.