{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Available alternative:
-
Article no.: 417675
Express anchor 8/10/70 IMC
Article no.: 2197826
Catalog no.: 4708
Article code:
Product details
Technical Data
| Through installation | Yes | |
| Stand-off installation | No | |
| Number of nuts | 1 | |
| Application conditions | Dry area | |
| Thread type | Metric | |
| Material | Galvanised steel | |
| Material |
Steel
|
|
| Fixing with expansion tool | No | |
| Suitable for cracked concrete | Yes | |
| Drive | Hexagonal | |
| hef | 40 mm | |
| hef | 40 / 30 mm | |
| M | M8 | |
| Fastening device | Nut | |
| Typ | IMC | |
| l | 70 mm | |
| Anchorage depth (reduced) | 30 mm | |
| t fix | 10 mm | |
| d0 | 8 mm | |
| SW | 13 mm | |
| h2 | 66 mm | |
| Thread length | 39 mm | |
| Surface |
zinc plated blue
|
|
| Disc | 16 x 1,6 mm | |
| Pre-installation | Yes | |
| Anchorage | Split anchor | |
| Suitable for non-cracked concrete | Yes | |
| Professional / DIY | Profi | |
| With collar | No | |
| Number of washers | 1 | |
| Surface protection | Galvanic/electrolytic zinc plated | |
| T inst | 15 Nm | |
| M x ls | M8 x 39 | |
| Application | Dry area | |
| max. fixture thickness (reduced) | 20 mm |
Packaging units
| 1 Pack | 100 Pieces |
Identification & Classification
| Article number | 2197826 | |
| Catalog number | 4708 | |
| EAN / GTIN | 4000657003658 | |
| Manufacturer number | 509009 | |
| Article class | RNC |
Description
Description:
The Upat Express Anchor IMC is the cost-effective specialist in the area of bolt anchors. This steel anchor, in a galvanised version, is particularly suitable for fastening medium to heavy loads indoors in uncracked concrete and natural stone with a dense structure. The Express Anchor IMC can be set in pre- and push-through installation and hammered into the blown-out drill hole. When the nut is tightened, the bolt pushes itself into the expansion clip, which expands against the borehole wall, thus ensuring a high level of holding security. The bolt anchor is used particularly frequently for fastening cable support systems and stair railings.
Advantage:
- Secure anchoring: ETA concrete approval option 7. Versatile use for secure anchoring in uncracked concrete
- Fastening close to edges: The cone and expansion clip unit enables minimal edge and centre distances
- Easy to install: Shaft with optimised diameter for low impact energy.
- Protected thread: Distinctive impact pin protects the thread from damage during the setting process
- Reliable follow-up check: The head embossing enables follow-up checks when installed
- Secure hammering: The clip remains in position during hammering, even if it hits reinforcement or unfavourable drill holes.
- Stainless steel (R/A4): For fastenings outdoors or in damp rooms.
- Galvanised steel (gvz): For fastenings in dry indoor areas
- Short (K): The short version of the bolt anchor reduces the drill hole depth and the risk of hitting reinforcement, and enables quick installation while saving costs
- Large washer (GS): The large washer protects the surface of the attachment and prevents cutting into wood
Application Area:
Approved for:
- Concrete C20/25 to C50/60, non-cracked
- Concrete C12/15
- Natural stone with dense structure
Application Notes:
Function: When the nut is tightened, the bolt pushes into the expansion clip, which spreads against the borehole wall.
Installation: The Upat Express anchor IMC is installed using through-hole mounting. Drill the hole, clean the hole. Drive in the bolt anchor. Tighten to the specified torque – done. The bolt diameter is equal to the hole diameter
Tools: Drill, drill press, blow-out pump (UPM AB), hammer, torque wrench
Installation: The Upat Express anchor IMC is installed using through-hole mounting. Drill the hole, clean the hole. Drive in the bolt anchor. Tighten to the specified torque – done. The bolt diameter is equal to the hole diameter
Tools: Drill, drill press, blow-out pump (UPM AB), hammer, torque wrench