{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Semi-roughing shell end mill NF, uncoated, ⌀×width js16: 40X32mm
Article no.: 240508
Catalog no.: 182500
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 40 mm | |
| Diameter of mounting hole | 16 mm | |
| Countersink diameter of mounting hole | 23 mm | |
| Cutting width | 32 mm | |
| ISO milling cutter type | Shell end mills | |
| Number of cutters (peripheral side) | 6 | |
| Tooth pitch | 20.94 mm | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Helical pitch | 217.66 mm | |
| Corner version | sharp-edged | |
| Tool material | HSS-E | |
| Cutting media, manufacturer’s designation | HSS-E | |
| Coating | uncoated | |
| Overall length | 32 mm | |
| Functional length | 32 mm | |
| Weight | 81 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 1880 T1 | |
| Machining method | face milling | |
| Colour ring | without | |
| Type of product | Cylindrical milling cutter | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth | 8 mm; 32 mm |
Identification & Classification
| Article number | 240508 | |
| Catalog number | 182500 | |
| EAN / GTIN | 4045197096906 | |
| Manufacturer number | 182500 40X32 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
30
P
28
P
25
M
20
M
18
N
45
Description
Version:
Relief ground profile. Wide lands permit frequent regrinding without losing the profile.
Note:
fz for ae = 0.5 - 1×D.