{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Semi-roughing shell end mill NF, uncoated, ⌀×width js16: 100X50mm
Article no.: 240512
Catalog no.: 182500
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter Dc | 100 mm | |
| Diameter of mounting hole D3 | 32 mm | |
| Countersink diameter of mounting hole D4 | 45 mm | |
| Cutting width B | 50 mm | |
| ISO milling cutter type | shell end mills | |
| Number of cutters (peripheral side) Z | 10 | |
| Tooth pitch t | 31.42 mm | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Helical pitch | 544.14 mm | |
| Corner version | sharp-edged | |
| Tool material | HSS-E | |
| Cutting media, manufacturer’s designation | HSS-E | |
| Coating | uncoated | |
| Overall length L | 50 mm | |
| Functional length | 50 mm | |
| Weight | 1’782 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 1880 T1 | |
| Machining method | face milling (FPL) | |
| Colour ring | without | |
| Type of product | cylindrical milling cutter | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth L2 | 20 mm; 50 mm |
Identification & Classification
| Article number | 240512 | |
| Catalog number | 182500 | |
| EAN / GTIN | 4045197096944 | |
| Manufacturer number | 182500 100X50 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
30
P
28
P
25
M
20
M
18
N
45
Description
Version:
Relief ground profile. Wide lands permit frequent regrinding without losing the profile.
Note:
fz for ae = 0.5 - 1×D.