{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Semi-roughing shell end mill NF, uncoated, ⌀×width js16: 80X45mm
Article no.: 240511
Catalog no.: 182500
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Walzenstirn-Schruppschlichtfräser | |
| Cutter diameter Dc | 80 mm | |
| Body diameter D2 | 80 mm | |
| Diameter of mounting hole D3 | 27 mm | |
| Countersink diameter of mounting hole D4 | 38 mm | |
| Cutting width B | 45 mm | |
| Countersink depth, mounting hole | 22 mm | |
| ISO milling cutter type | shell end mills | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Plunge angle max. | 6 degrees | |
| Number of cutters (peripheral side) Z | 8 | |
| Number of cutters (end face) Z | 8 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Corner version | as chamfer | |
| Corner chamfer width | 0 | |
| Corner chamfer angle | 90 | |
| Tool material | HSS | |
| Cutting media, manufacturer’s designation | HSS-E | |
| Coating | uncoated | |
| Overall length L | 45 mm | |
| Weight | 960 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 1880 T1 | |
| Machining method | face milling (FPL) | |
| Colour ring | without | |
| Type of product | shell end mills | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth L2 | 16 mm; 45 mm |
Identification & Classification
| Article number | 240511 | |
| Catalog number | 182500 | |
| EAN / GTIN | 4045197096937 | |
| Manufacturer number | 182500 80X45 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
30
P
28
P
25
M
20
M
18
N
45
Description
Version:
Relief ground profile. Wide lands permit frequent regrinding without losing the profile.
Note:
fz for ae = 0.5 - 1×D.