{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling APMT 180512 ER, for Softcut® mills, HB7630
Article no.: 538518
Catalog no.: 215250
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | Softcut® | |
| Wet maximum | suitable | |
| Manufacturer’s designation | APMT 180512 ER | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | pentagonal | |
| Wide insert B | 10.2 mm | |
| Thickness of the insert S | 5.56 mm | |
| Length of cutting insert L | 16.67 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 16.67 mm | |
| Height of cutting edge | 5.59 mm | |
| Corner radius R | 1.2 mm | |
| Corner chamfer length C | 1.9 mm | |
| Corner chamfer angle | 90 degrees | |
| Corner angle | 78 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | APMT 180512 ER | |
| Tool material | Carbide | |
| Machining group | M (stainless steel) | |
| Tool application group | INOX | |
| Cutting media, manufacturer’s designation | HB7630 | |
| Coating | CVD | |
| Grade | HB7630 | |
| Insert thickness T | 5.56 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | APMT 180512 ER | |
| Interface coding for insert according to ISO TS 13399-60 | AP1805123R | |
| Insert designation | APMT 180512 ER | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | stainless steel (INOX); stainless steel (M) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | finishing; roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 7 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 538518 | |
| Catalog number | 215250 | |
| EAN / GTIN | 4045197601032 | |
| Manufacturer number | 215250 INOX | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
M
170
M
130
Description
Note:
Standard application values for ae = 0.3×D / ap = 5 mm, ap max = 9 mm.