{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Alu SlotMachine solid carbide roughing end mill HPC / TPC, DLC, ⌀ h7 DC: 6mm
Article no.: 2161280
Catalog no.: 205283
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | Master Alu | |
| Wet maximum | suitable | |
| Manufacturer’s designation | MASTER ALU SLOTMACHINE VHM-FRAESER HB | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 0060 mm | |
| Dry machining | suitable | |
| Type of mounting | spigot | |
| Holder tolerance class | h$06 | |
| Shank diameter | 6 mm | |
| Shank length | 40.3 mm | |
| Holder diameter, lower dimension | -8 mm | |
| Oil | suitable | |
| Shank type | HB | |
| Air | suitable | |
| Tool material | solid carbide | |
| Standard designation for cutting medium, 2nd Priority | HC-K30 | |
| Standard designation for cutting medium, 3rd Priority | HC-K30 | |
| Machining group, manufacturer-specific | N | |
| Machining group | N (non-ferrous metals) | |
| Tool application group | W | |
| Cutting media, manufacturer’s designation | VHM | |
| Coating | DLC | |
| Cutter diameter | 6 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | h7 | |
| Neck diameter | 5.5 mm | |
| Cutting edge length | 20 mm | |
| Head length | 20 mm | |
| ISO milling cutter type | J | |
| Balancing quality | G 2,5 mit HB | |
| Relief angle | 10 degrees | |
| Side rake angle | 10 degrees | |
| Transition angle | 20 degrees | |
| Number of effective cutters, peripheral side | 5 | |
| Number of effective cutters, end face | 5 | |
| Number of central cutting edges | 0 | |
| Twist direction | right-hand | |
| Twist angle | 45 degrees | |
| Helical pitch | 45 mm | |
| Number of corner versions | 1 | |
| Corner / edge | 2 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.2 mm | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Cutting arc angle max. | 48 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 5 | |
| Helix angle characteristic | unequal spacing | |
| Interface | joint 1 | |
| Gauge length | 29 mm | |
| Usable length | 24 mm | |
| Overall length | 65 mm | |
| Functional length | 47 mm | |
| Max. speed | 35,000 min-1 | |
| Weight | 25 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Machining method | End milling; face milling; slot milling | |
| Colour ring | yellow | |
| Machining strategy | TPC | |
| Type of product | shoulder mill | |
| Correction factor fz | 3 | |
| Cutting depth min. | 0.2 mm | |
| Max. cutting depth | 20 mm; 6 mm |
Identification & Classification
| Article number | 2161280 | |
| Catalog number | 205283 | |
| EAN / GTIN | 4069515039987 | |
| Manufacturer number | 205283 6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
500
N
480
N
450
N
120
N
100
N
160
N
200
Description
Version:
For roughing.
Special profile for machining non-ferrous metals. Significant reduction in the chip volume due to targeted chip fragmentation using the special cutter geometry.
As a result of the 5 teeth, even higher feed rates are possible. The end face is supported by an additional stabilising chamfer, which leads to smoother operation during helical plunging.
Special profile for machining non-ferrous metals. Significant reduction in the chip volume due to targeted chip fragmentation using the special cutter geometry.
As a result of the 5 teeth, even higher feed rates are possible. The end face is supported by an additional stabilising chamfer, which leads to smoother operation during helical plunging.
Note:
Cutting data for TPC machining in the ToolScout.