Ancorante a percussione in acciaio inossidabile M6 USA

The Upat drop-in anchor USA A4 is the time-saving solution for fastening with screws and threaded rods with metric threads. This internal thread anchor, made of rustproof steel, is particularly suitable for outdoor fastening in concrete and natural stone with a dense structure. It is inserted into the cleaned drill hole and then anchored with the setting tool USA-SWZ by hammer blows particularly quickly and with little effort, flush with the surface. The expansion cone pushes itself into the anchor sleeve and expands it against the drill hole wall. In contrast to many other bolt anchors, no torque needs to be applied to the threaded rod or screw to ensure correct expansion. The drop-in anchor USA A4 is used particularly frequently for overhead installation and for thin concrete for the approved fastening of non-load-bearing systems, such as pipe routes and ventilation ducts.

• Tested safety: ETA concrete option 1 approval for multiple fastening of non-load-bearing systems, ETA concrete option 7 for single fastening, as well as fire resistance and sprinkler systems.
• Simple impact installation: The edge secures the impact anchor against slipping into the drill hole and enables flush mounting.
• No torque: Thanks to the impact installation, no torque is required for the metric screws.
• High loads: The impact anchor sleeve with internal expansion cone enables high load-bearing capacities in concrete.
• Robust anchoring: The impact anchor sleeve is pressed from a single piece without cutting and is particularly resistant
• Flexible installation: The metric internal thread allows threaded rods, hooks or screws to be flexibly installed and removed flush with the surface
• Reliable setting control: The embossing applied during expansion with the setting tool simplifies checking the anchoring and offers high application reliability.

Material

• Stainless steel (R/A4): For fastenings outdoors or in damp rooms
• Galvanised steel (gvz): For fastenings in dry indoor areas

Approved for:

• Concrete C20/25 to C50/60, cracked and prestressed concrete hollow core slabs C30/37 to C50/60 for use as multiple fastenings for non-load-bearing systems
• Concrete C20/25 to C50/60, uncracked

Suitable for:

• Concrete C12/15
• Natural stone with dense structure

Function: When the setting tool is driven in, the expansion cone is pressed against the conical anchor sleeve and spreads the impact anchor against the borehole wall. The expansion cone always remains in position so that the anchor remains firmly in place when a screw is screwed in or out.

Installation: The Upat USA drive-in anchor is installed in a pre-installation process. Drill the hole, clean the drill hole. Drive in the drive-in anchor. Drive in the setting tool. Install the component with the screw – done!

Tools: Drill, drill press, blow-out pump (UPM AM), hammer, setting tool (USA-SWZ)