Alternativa disponibile:
-
Codice art.: 417711
Ancorante rapida 16/160/278 IMC
Codice art.: 2197801
N. del catalogo: 4708
Codice materiale:
Dettagli prodotto
Dati tecnici
| Montaggio passante |
Yes
|
|
| Montaggio a distanza |
No
|
|
| Profondità di ancoraggio hef,max / hef,min |
80 / 65 mm
|
|
| Numero di dadi |
1
|
|
| Condizioni di applicazione |
Dry area
|
|
| Tipo di filettatura |
Metric
|
|
| materiale |
Galvanised steel
|
|
| Materiale |
acciaio
|
|
| Fissaggio con utensile di espansione |
No
|
|
| Idoneo per calcestruzzo fessurato |
Yes
|
|
| Azionamento |
Hexagonal
|
|
| M |
M16
|
|
| Dispositivo di fissaggio |
Nut
|
|
| Profondita di ancoraggio (standard) |
80 mm
|
|
| Tipo |
IMC
|
|
| l |
278 mm
|
|
| Profondita di ancoraggio (ridotta) |
65 mm
|
|
| t fix |
160 mm
|
|
| d0 |
16 mm
|
|
| SW |
24 mm
|
|
| h2 |
264 mm
|
|
| Lunghezza filettatura |
184 mm
|
|
| Finitura |
zincato blu
|
|
| Montaggio a tassello |
Yes
|
|
| Ancoraggio |
Split anchor
|
|
| Idoneo per calcestruzzo non fessurato |
Yes
|
|
| Professionale / Fai da te |
Profi
|
|
| Con collarino |
No
|
|
| Numero di rondelle |
1
|
|
| Protezione superficiale |
Galvanic/electrolytic zinc plated
|
|
| T inst |
100 Nm
|
|
| M x ls |
M16 x 184
|
|
| Applicazione |
Dry area
|
|
| Spessore max dell elemento da fissare (ridotta) |
175 mm
|
Unità di imballaggio
| 1 Pacco | 10 pezzi |
Identificazione e classificazione
| Codice articolo | 2197801 | |
| Numero del catalogo | 4708 | |
| EAN / GTIN | 4048962158687 | |
| Codice del produttore | 519039 | |
| Classe dell’articolo | RNC |
Descrizione
Descrizione:
The Upat Express Anchor IMC is the cost-effective specialist in the area of bolt anchors. This steel anchor, in a galvanised version, is particularly suitable for fastening medium to heavy loads indoors in uncracked concrete and natural stone with a dense structure. The Express Anchor IMC can be set in pre- and push-through installation and hammered into the blown-out drill hole. When the nut is tightened, the bolt pushes itself into the expansion clip, which expands against the borehole wall, thus ensuring a high level of holding security. The bolt anchor is used particularly frequently for fastening cable support systems and stair railings.
Vantaggi:
- Secure anchoring: ETA concrete approval option 7. Versatile use for secure anchoring in uncracked concrete
- Fastening close to edges: The cone and expansion clip unit enables minimal edge and centre distances
- Easy to install: Shaft with optimised diameter for low impact energy.
- Protected thread: Distinctive impact pin protects the thread from damage during the setting process
- Reliable follow-up check: The head embossing enables follow-up checks when installed
- Secure hammering: The clip remains in position during hammering, even if it hits reinforcement or unfavourable drill holes.
- Stainless steel (R/A4): For fastenings outdoors or in damp rooms.
- Galvanised steel (gvz): For fastenings in dry indoor areas
- Short (K): The short version of the bolt anchor reduces the drill hole depth and the risk of hitting reinforcement, and enables quick installation while saving costs
- Large washer (GS): The large washer protects the surface of the attachment and prevents cutting into wood
Area di applicazione:
Approved for:
- Concrete C20/25 to C50/60, non-cracked
- Concrete C12/15
- Natural stone with dense structure
Note applicative:
Function: When the nut is tightened, the bolt pushes into the expansion clip, which spreads against the borehole wall.
Installation: The Upat Express anchor IMC is installed using through-hole mounting. Drill the hole, clean the hole. Drive in the bolt anchor. Tighten to the specified torque – done. The bolt diameter is equal to the hole diameter
Tools: Drill, drill press, blow-out pump (UPM AB), hammer, torque wrench
Installation: The Upat Express anchor IMC is installed using through-hole mounting. Drill the hole, clean the hole. Drive in the bolt anchor. Tighten to the specified torque – done. The bolt diameter is equal to the hole diameter
Tools: Drill, drill press, blow-out pump (UPM AB), hammer, torque wrench