{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Alternativa disponibile:
-
Codice art.: 417684
Ancorante rapida 10/10/85 IMC
Codice art.: 2197821
N. del catalogo: 4708
Codice materiale:
Dettagli prodotto
Dati tecnici
| Montaggio passante | Yes | |
| Montaggio a distanza | No | |
| Numero di dadi | 1 | |
| Condizioni di applicazione | Dry area | |
| Tipo di filettatura | Metric | |
| materiale | Galvanised steel | |
| Materiale |
acciaio
|
|
| Fissaggio con utensile di espansione | No | |
| Idoneo per calcestruzzo fessurato | Yes | |
| Azionamento | Hexagonal | |
| hef | 50 mm | |
| hef | 40 / 30 mm | |
| M | M10 | |
| Dispositivo di fissaggio | Nut | |
| Tipo | IMC | |
| l | 85 mm | |
| Profondita di ancoraggio (ridotta) | 40 mm | |
| t fix | 10 mm | |
| d0 | 10 mm | |
| SW | 17 mm | |
| h2 | 78 mm | |
| Lunghezza filettatura | 47 mm | |
| Finitura |
zincato blu
|
|
| Vetro | 20 x 2 mm | |
| Montaggio a tassello | Yes | |
| Ancoraggio | Split anchor | |
| Idoneo per calcestruzzo non fessurato | Yes | |
| Professionale / Fai da te | Profi | |
| Con collarino | No | |
| Numero di rondelle | 1 | |
| Protezione superficiale | Galvanic/electrolytic zinc plated | |
| T inst | 30 Nm | |
| M x ls | M10 x 46 | |
| Applicazione | Dry area | |
| Spessore max dell elemento da fissare (ridotta) | 20 mm |
Packaging units
| 1 Pacco | 50 pezzi |
Identificazione e classificazione
| Codice articolo | 2197821 | |
| Numero del catalogo | 4708 | |
| EAN / GTIN | 4000657003702 | |
| Codice del produttore | 509014 | |
| Classe dell`articolo | RNC |
Descrizione
Descrizione:
The Upat Express Anchor IMC is the cost-effective specialist in the area of bolt anchors. This steel anchor, in a galvanised version, is particularly suitable for fastening medium to heavy loads indoors in uncracked concrete and natural stone with a dense structure. The Express Anchor IMC can be set in pre- and push-through installation and hammered into the blown-out drill hole. When the nut is tightened, the bolt pushes itself into the expansion clip, which expands against the borehole wall, thus ensuring a high level of holding security. The bolt anchor is used particularly frequently for fastening cable support systems and stair railings.
Vantaggi:
- Secure anchoring: ETA concrete approval option 7. Versatile use for secure anchoring in uncracked concrete
- Fastening close to edges: The cone and expansion clip unit enables minimal edge and centre distances
- Easy to install: Shaft with optimised diameter for low impact energy.
- Protected thread: Distinctive impact pin protects the thread from damage during the setting process
- Reliable follow-up check: The head embossing enables follow-up checks when installed
- Secure hammering: The clip remains in position during hammering, even if it hits reinforcement or unfavourable drill holes.
- Stainless steel (R/A4): For fastenings outdoors or in damp rooms.
- Galvanised steel (gvz): For fastenings in dry indoor areas
- Short (K): The short version of the bolt anchor reduces the drill hole depth and the risk of hitting reinforcement, and enables quick installation while saving costs
- Large washer (GS): The large washer protects the surface of the attachment and prevents cutting into wood
Area di applicazione:
Approved for:
- Concrete C20/25 to C50/60, non-cracked
- Concrete C12/15
- Natural stone with dense structure
Note applicative:
Function: When the nut is tightened, the bolt pushes into the expansion clip, which spreads against the borehole wall.
Installation: The Upat Express anchor IMC is installed using through-hole mounting. Drill the hole, clean the hole. Drive in the bolt anchor. Tighten to the specified torque – done. The bolt diameter is equal to the hole diameter
Tools: Drill, drill press, blow-out pump (UPM AB), hammer, torque wrench
Installation: The Upat Express anchor IMC is installed using through-hole mounting. Drill the hole, clean the hole. Drive in the bolt anchor. Tighten to the specified torque – done. The bolt diameter is equal to the hole diameter
Tools: Drill, drill press, blow-out pump (UPM AB), hammer, torque wrench