{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Profilo in alluminio SolarMetal P H50 400 mm AL
Codice art.: 2242872
N. del catalogo: 8321
Codice materiale:
Nuovo prodotto
Dettagli prodotto
Dati tecnici
| L | 400 mm |
Packaging units
| 1 Pacco | 30 pezzi |
Identificazione e classificazione
| Codice articolo | 2242872 | |
| Numero del catalogo | 8321 | |
| EAN / GTIN | 8001132121900 | |
| Codice del produttore | 574515 | |
| Classe dell`articolo | QNF |
Descrizione
Vantaggi:
- Short rails for cost optimisation and no problems with thermal expansion.
- Flat and wide base allows two fixing points on each rib.
- Suitable for the entire fischer clamp range.
- SolarMetal P H50 is compatible with the installation of photovoltaic optimizers: the 50 mm height supports improving the ventilation of the modules.
Area di applicazione:
- Installation of portrait oriented photovoltaic panels on trapezoidal sheet roofs.
Note applicative:
- Choose between long and short rails depending on the installation layout and taking into account thermal expansion.
- Determine the centre distance of the fastenings according to the trapezoidal metal sheet geometry, snow and wind loads (use SOLARPANEL-FiX software to design the system).
- Stick a layer of CG INT butyl adhesive tape (minimun lenght 80 mm) on the trapezoidal metal sheet rib before applying and fixing the rail.
- Position the rail on the trapezoidal metal sheet.
- If fixing with ALG rivets, drill the rail and the sheet together with a 5.5mm diameter drill bit.
- For fixing with EPDM self-drilling Solar screw, pre-drill the rail, then place it on the sheet and screw the self-drilling screw through the pre-drilled hole.
- Seal the rivets or screws with fischer SB - Bitumen Sealant.