{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide circular saw blade DIN 1837 A fine, uncoated, ⌀×thickness: 63X1,6mm
Article no.: 312086
Catalog no.: 179800
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Cutter diameter Dc | 63 mm | |
| Diameter of mounting hole D3 | 16 mm | |
| Cutting width B | 1.6 mm | |
| Hub width | 20 mm | |
| Tooth form | Aw | |
| Number of cutters (peripheral side) Z | 80 | |
| Tooth pitch t | 2.474 mm | |
| Corner version | sharp-edged | |
| Tool material | solid carbide | |
| Coating | uncoated | |
| Overall length L | 1.6 mm | |
| Functional length | 20 mm | |
| Weight | 74 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 1837 | |
| Shape letter standard number | A | |
| Machining method | parting-off milling | |
| Type of product | circular saw blade | |
| Correction factor fz | 1.5 | |
| Max. cutting depth L2 | 19.25 mm |
Identification & Classification
| Article number | 312086 | |
| Catalog number | 179800 | |
| EAN / GTIN | 4045197246332 | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 Bopfingen, Germany, www.re-bo.com |
Application Table
N
1200
N
700
P
200
P
140
P
140
P
90
P
40
M
110
M
100
S
90
K
125
N
400
N
600
Description
Version:
Top quality German product with precision toothing and hollow ground mirror finish sides. Compared to HSS saw blades, the cutting speed can be increased by a factor of 3 to 4.
DIN 1837 A fine-toothed with raked teeth to form A with chisel edge. For thin-walled components and small cutting depths.
DIN 1837 A fine-toothed with raked teeth to form A with chisel edge. For thin-walled components and small cutting depths.
Note:
- Stable conditions of machine and component clamping are important prerequisites. If these conditions are disregarded the circular saw blade may break.
- The values for radial run-out and axial run-out are considerably better than the values specified in DIN 1840.
- Special sizes on request.