{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide circular saw blade DIN 1837 A fine, uncoated, ⌀×thickness: 100X3mm
Article no.: 312106
Catalog no.: 179800
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | VHM-Kreissägeblatt | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 100 mm | |
| Diameter of mounting hole | 22 mm | |
| Cutting width | 3 mm | |
| ISO milling cutter type | H | |
| Setting angle | 90 degrees | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Tooth form | Aw | |
| Number of cutters (peripheral side) | 80 | |
| Tooth pitch | 3.93 mm | |
| Corner version | sharp-edged | |
| Tool material | solid carbide | |
| Coating | uncoated | |
| Usable length | 35 mm | |
| Overall length | 3 mm | |
| Functional length | 100 mm | |
| Weight | 327 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 1837 | |
| Shape letter standard number | A | |
| Machining method | parting-off milling | |
| Type of product | circular saw blade | |
| Correction factor fz | 1.5 | |
| Max. cutting depth | 30.25 mm |
Identification & Classification
| Article number | 312106 | |
| Catalog number | 179800 | |
| EAN / GTIN | 4045197246523 | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 Bopfingen, Germany, www.re-bo.com |
Application Table
N
1200
N
700
P
200
P
140
P
140
P
90
P
40
M
110
M
100
S
90
K
125
N
400
N
600
Description
Version:
Top quality German product with precision toothing and hollow ground mirror finish sides. Compared to HSS saw blades, the cutting speed can be increased by a factor of 3 to 4.
DIN 1837 A fine-toothed with raked teeth to form A with chisel edge. For thin-walled components and small cutting depths.
DIN 1837 A fine-toothed with raked teeth to form A with chisel edge. For thin-walled components and small cutting depths.
Note:
- Stable conditions of machine and component clamping are important prerequisites. If these conditions are disregarded the circular saw blade may break.
- The values for radial run-out and axial run-out are considerably better than the values specified in DIN 1840.
- Special sizes on request.