{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide circular saw blade DIN 1837 A fine, uncoated, ⌀×thickness: 100X1,6mm
Article no.: 312103
Catalog no.: 179800
Article code:
Product details
Technical Data
| Innenkühlung | nein | |
| Kühlschmierstoff | ja | |
| nass min. | geeignet | |
| nass max. | geeignet | |
| trocken Bearbeitung | bedingt geeignet | |
| Öl | geeignet | |
| Luft | bedingt geeignet | |
| Schneidendurchmesser Dc | 100 mm | |
| Durchmesser Aufnahmebohrung D3 | 22 mm | |
| Schnittbreite B | 1,6 mm | |
| ISO-Fräsertyp | T | |
| Einstellwinkel | 90 Grad | |
| Rückspanwinkel | 0 Grad | |
| Seitenspanwinkel | 0 Grad | |
| Zahnform | Aw | |
| Anzahl Schneiden (umfangseitig) Z | 100 | |
| Eckausführung | scharfkantig | |
| Schneidstoff | VHM | |
| Schneidstoffe, Herstellerbezeichnung | VHM | |
| Beschichtung | unbeschichtet | |
| Länge gesamt L | 1,6 mm | |
| Funktionslänge | 35 mm | |
| Gewicht | 206 g | |
| Schneidrichtung | rechtsschneidend | |
| Werkzeugausführung | Voll-Hartmetall | |
| Norm | DIN 1837 | |
| Formbuchstabe Normnummer | A | |
| Bearbeitungsverfahren | Trennfräsen (FTR) | |
| Produktart | Kreissägeblatt | |
| Korrekturfaktor fz | 1,5 | |
| Schnitttiefe max. L2 | 30,25 mm |
Identification & Classification
| Article number | 312103 | |
| Catalog number | 179800 | |
| EAN / GTIN | 4045197246509 | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 Bopfingen, Germany, www.re-bo.com |
Application Table
N
1200
N
700
P
200
P
140
P
140
P
90
P
40
M
110
M
100
S
90
K
125
N
400
N
600
Description
Version:
Top quality German product with precision toothing and hollow ground mirror finish sides. Compared to HSS saw blades, the cutting speed can be increased by a factor of 3 to 4.
DIN 1837 A fine-toothed with raked teeth to form A with chisel edge. For thin-walled components and small cutting depths.
DIN 1837 A fine-toothed with raked teeth to form A with chisel edge. For thin-walled components and small cutting depths.
Note:
- Stable conditions of machine and component clamping are important prerequisites. If these conditions are disregarded the circular saw blade may break.
- The values for radial run-out and axial run-out are considerably better than the values specified in DIN 1840.
- Special sizes on request.