{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide circular saw blade DIN 1837 A fine, uncoated, ⌀×thickness: 125X2,5mm
Article no.: 647096
Catalog no.: 179800
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | milling arbor mounting | |
| Holder version | metric | |
| Holder size, metric | 22 mm | |
| Dry machining | suitable | |
| Type of mounting | hole (internal mounting) | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | VHM-Kreissägeblatt DIN 1837 A fein | |
| Cutter diameter Dc | 125 mm | |
| Diameter of mounting hole D3 | 22 mm | |
| Cutting width B | 2.5 mm | |
| Setting angle | 90 degrees | |
| Tooth form | Aw | |
| Number of cutters (peripheral side) Z | 100 | |
| Tool material | solid carbide | |
| Machining group | M (stainless steel); P (steel); S (difficult-to-machine materials) | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Overall length L | 2.5 mm | |
| Weight | 441 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 1837 | |
| Shape letter standard number | A | |
| Machining method | parting-off milling (FTR) | |
| Type of product | circular saw blade | |
| Maximum cutting depth | 42.75 mm | |
| Correction factor fz | 1.5 | |
| Cutting depth min. | 2.5 mm | |
| Max. cutting depth L2 | 42.75 mm |
Identification & Classification
| Article number | 647096 | |
| Catalog number | 179800 | |
| EAN / GTIN | 4045197246585 | |
| Article class | 17C | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 Bopfingen, Germany, www.re-bo.com |
Application Table
N
1200
N
700
P
200
P
140
P
140
P
90
P
40
M
110
M
100
S
90
K
125
N
400
N
600
Description
Version:
Top quality German product with precision toothing and hollow ground mirror finish sides. Compared to HSS saw blades, the cutting speed can be increased by a factor of 3 to 4.
DIN 1837 A fine-toothed with raked teeth to form A with chisel edge. For thin-walled components and small cutting depths.
DIN 1837 A fine-toothed with raked teeth to form A with chisel edge. For thin-walled components and small cutting depths.
Note:
- Stable conditions of machine and component clamping are important prerequisites. If these conditions are disregarded the circular saw blade may break.
- The values for radial run-out and axial run-out are considerably better than the values specified in DIN 1840.
- Special sizes on request.